Bernina #83 Circular Embroidery Attachment

• For decorative circles and semicircles
• Can be used for different diameters
• Use with utility, decorative stitches or alphabets
• Also suitable for appliquéing ribbons
• For 5.5 mm and 9 mm machines

The attachment is screwed to the freearm. The center of rotation can be either to the right or left of the needle, with the attaching screw lying flat enough to allow the fabric to feed smoothly over it. A diameter of between 1 inch and 5-5/16 inches (2.5 cm and 13.5 cm) can be set on the slide.

The fabric must be properly reinforced for circular embroidery, so 2-3 layers of stabilizer should be placed under your project. The fabric is put onto the pin at the center of the desired circle and held in place with a rubber cap to prevent shifting during sewing. The Circular Embroidery Attachment #83 can be used in conjunction with various presser feet, and will enable you to sew circles with any decorative stitches you wish, and even arrange lettering in a circle.
 
Compatibility

125, 125 S, 130, 135, 135 S, 140, 145, 145 S , 150, 153, 153 QE, 155, 160, 163, 165, 170, 180, 185, 200, 210, 220, 230, 230 PE, 240, 430, 435, 440 QE, 450, 630, 640, 730 B 215, B 325, B 330, B 335,B 435, B 475 QE, B 480, B 350 PE, B 380, B 530, B 535,B 540, B 550 QE, B 555, B 560,B 570 QE/QEE, B 590, B 580, B 710, B 720, B 740, B 750 QE, B 770 QE/QEE, B 780, B 790, B 790 PLUS, B 820 QE, B 830, B 880, B 880 PLUS